diff --git a/Platformio/lib/Keypad/examples/loopCounter/loopCounter.ino b/Platformio/lib/Keypad/examples/loopCounter/loopCounter.ino
index 695e489..b0470e7 100644
--- a/Platformio/lib/Keypad/examples/loopCounter/loopCounter.ino
+++ b/Platformio/lib/Keypad/examples/loopCounter/loopCounter.ino
@@ -15,7 +15,7 @@ byte colPins[COLS] = {8, 7, 6}; //connect to the column pinouts of the keypad
 Keypad kpd = Keypad( makeKeymap(keys), rowPins, colPins, ROWS, COLS );
 
 unsigned long loopCount = 0;
-unsigned long timer_t = 0;
+unsigned long timer_ms = 0;
 
 void setup(){
 	Serial.begin(9600);
@@ -33,12 +33,12 @@ void loop(){
 	// you a relative idea of just how much the debounceTime has changed the
 	// speed of your code. If you set a high debounceTime your loopCount will
 	// look good but your keypresses will start to feel sluggish.
-	if ((millis() - timer_t) > 1000) {
+	if ((millis() - timer_ms) > 1000) {
 		Serial.print("Your loop code ran ");
 		Serial.print(loopCount);
 		Serial.println(" times over the last second");
 		loopCount = 0;
-		timer_t = millis();
+		timer_ms = millis();
 	}
 	loopCount++;
 	if(key)
diff --git a/Platformio/lib/Keypad/src/Keypad.cpp b/Platformio/lib/Keypad/src/Keypad.cpp
index 96f9cbc..c4d8cfc 100644
--- a/Platformio/lib/Keypad/src/Keypad.cpp
+++ b/Platformio/lib/Keypad/src/Keypad.cpp
@@ -83,18 +83,31 @@ bool Keypad::getKeys() {
 void Keypad::scanKeys() {
 	// Re-intialize the row pins. Allows sharing these pins with other hardware.
 	for (byte r=0; r<sizeKpd.rows; r++) {
+		// Logic needs to be inverted. This way the ESP32’s EXT1 wakeup can be used to detect if the accelerometer pin or any button pin goes high
+		// original from Keypad
+		// pin_mode(rowPins[r],INPUT_PULLUP);
+		// changed for usage in OMOTE
 		pin_mode(rowPins[r],INPUT);
 	}
 
 	// bitMap stores ALL the keys that are being pressed.
 	for (byte c=0; c<sizeKpd.columns; c++) {
 		pin_mode(columnPins[c],OUTPUT);
+		// original from Keypad
+		// pin_write(columnPins[c], LOW);	// Begin column pulse output.
+		// changed for usage in OMOTE
 		pin_write(columnPins[c], HIGH);	// Begin column pulse output.
 		for (byte r=0; r<sizeKpd.rows; r++) {
+			// original from Keypad
+			// bitWrite(bitMap[r], c, !pin_read(rowPins[r]));  // keypress is active low so invert to high.
+			// changed for usage in OMOTE
 			bitWrite(bitMap[r], c, pin_read(rowPins[r]));  // keypress is active low so invert to high.
 		}
 		// Set pin to high impedance input. Effectively ends column pulse.
-		pin_write(columnPins[c],LOW);
+		// original from Keypad
+		// pin_write(columnPins[c],HIGH);
+		// changed for usage in OMOTE
+		pin_write(columnPins[c], LOW);
 		pin_mode(columnPins[c],INPUT);
 	}
 }
diff --git a/Platformio/lib/Keypad/src/Keypad.h b/Platformio/lib/Keypad/src/Keypad.h
index 17b32ee..0648114 100644
--- a/Platformio/lib/Keypad/src/Keypad.h
+++ b/Platformio/lib/Keypad/src/Keypad.h
@@ -35,6 +35,22 @@
 
 #include "Key.h"
 
+// bperrybap - Thanks for a well reasoned argument and the following macro(s).
+// See http://arduino.cc/forum/index.php/topic,142041.msg1069480.html#msg1069480
+#ifndef INPUT_PULLUP
+#warning "Using  pinMode() INPUT_PULLUP AVR emulation"
+#define INPUT_PULLUP 0x2
+#define pinMode(_pin, _mode) _mypinMode(_pin, _mode)
+#define _mypinMode(_pin, _mode)  \
+do {							 \
+	if(_mode == INPUT_PULLUP)	 \
+		pinMode(_pin, INPUT);	 \
+		digitalWrite(_pin, 1);	 \
+	if(_mode != INPUT_PULLUP)	 \
+		pinMode(_pin, _mode);	 \
+}while(0)
+#endif
+
 
 #define OPEN LOW
 #define CLOSED HIGH