30 lines
1.2 KiB
Markdown
30 lines
1.2 KiB
Markdown
|
A FreeCAD workbench for creating CNC (or laser) constructions. It uses Assembly4 to mark locations for tabs or fingers.
|
||
|
|
|
||
|
|
# Wish list
|
||
|
|
* Basic functionality!
|
||
|
|
* LCS/Axis creates tab/finger at that location
|
||
|
|
* Planes create linear array along interface
|
||
|
|
* Sketch to define custom tab/slot profile
|
||
|
|
* automatic supports/angle attachments
|
||
|
|
|
||
|
|
## Data
|
||
|
|
|
||
|
|
### All
|
||
|
|
* sketch
|
||
|
|
|
||
|
|
### Linear
|
||
|
|
* count
|
||
|
|
* end offsets ?
|
||
|
|
|
||
|
|
# Profile Sketch, automatic width/depth matching
|
||
|
|
It would be nice if the profile Sketch can be variable in order to automatically handle different
|
||
|
|
stock depths. The Profile would need a common definition, likely start at origin (0,0,0) with one
|
||
|
|
line traveling +X and another in -Z. These line could be either; unconstrained, allowing the WB to
|
||
|
|
set their length and have the rest of the sketch constrained non-numerically. Use a ratio based
|
||
|
|
pseudo-unit; 1(ignoring mm) would take the exact thickness of the attached part, 0.5 would be half.
|
||
|
|
All constraints in the model would be scaled to real world units based on these percents.
|
||
|
|
|
||
|
|
# Automatic angle attachments
|
||
|
|
In cases where two parts are not attached perpendicular to one another an angled attachment piece
|
||
|
|
would be required. In some cases this should be able to be created automatically.
|