140 lines
3.8 KiB
C
140 lines
3.8 KiB
C
#ifndef _LORA32_H__
|
|
#define _LORA32_H__
|
|
|
|
#include "driver/spi_common.h"
|
|
#include "driver/spi_master.h"
|
|
#include "freertos/event_groups.h"
|
|
|
|
#define REG_FIFO 0x00
|
|
#define REG_OP_MODE 0x01
|
|
#define REG_BR_MSB 0x02
|
|
#define REG_BR_LSB 0x03
|
|
#define REG_FD_MSB 0x04
|
|
#define REG_FD_LSB 0x05
|
|
#define REG_FRF_MSB 0x06
|
|
#define REG_FRF_MID 0x07
|
|
#define REG_FRF_LSB 0x08
|
|
#define REG_PA_CONFIG 0x09
|
|
#define REG_LNA 0x0c
|
|
#define REG_FIFO_ADDR_PTR 0x0d
|
|
#define REG_FIFO_TX_BASE_ADDR 0x0e
|
|
#define REG_FIFO_RX_BASE_ADDR 0x0f
|
|
#define REG_FIFO_RX_CURRENT_ADDR 0x10
|
|
#define REG_IRQ_FLAGS 0x12
|
|
#define REG_RX_NB_BYTES 0x13
|
|
#define REG_PKT_RSSI_VALUE 0x1a
|
|
#define REG_PKT_SNR_VALUE 0x1b
|
|
#define REG_MODEM_CONFIG_1 0x1d
|
|
#define REG_MODEM_CONFIG_2 0x1e
|
|
#define REG_PREAMBLE_MSB 0x20
|
|
#define REG_PREAMBLE_LSB 0x21
|
|
#define REG_PAYLOAD_LENGTH 0x22
|
|
#define REG_MODEM_CONFIG_3 0x26
|
|
#define REG_RSSI_WIDEBAND 0x2c
|
|
#define REG_DETECTION_OPTIMIZE 0x31
|
|
#define REG_DETECTION_THRESHOLD 0x37
|
|
#define REG_SYNC_WORD 0x39
|
|
#define REG_DIO_MAPPING_1 0x40
|
|
#define REG_VERSION 0x42
|
|
#define REG_PA_DAC 0x4D
|
|
|
|
// modes
|
|
#define MODE_SLEEP 0x00
|
|
#define MODE_STANDBY 0x01
|
|
#define MODE_TX 0x03
|
|
#define MODE_RX_CONTINUOUS 0x05
|
|
#define MODE_RX_SINGLE 0x06
|
|
#define MODE_CAD_DETECT 0x07
|
|
#define MODE_LONG_RANGE_MODE 0x80
|
|
|
|
// PA config
|
|
#define PA_BOOST 0x80
|
|
|
|
// IRQ masks
|
|
#define IRQ_RX_TIMEOUT 0x80
|
|
#define IRQ_RX_DONE 0x40
|
|
#define IRQ_PAYLOAD_CRC_ERROR 0x20
|
|
#define IRQ_VALID_HEADER 0x10
|
|
#define IRQ_TX_DONE 0x08
|
|
#define IRQ_CAD_DONE 0x04
|
|
#define IRQ_FHSS_CHANGE 0x02
|
|
#define IRQ_CAD_DETECTED 0x01
|
|
|
|
#define MAX_PKT_LENGTH 255
|
|
|
|
#define DETECT_OPT_SF6 0xC5
|
|
#define DETECT_THRES_SF6 0x0C
|
|
#define DETECT_OPT_OTHER 0xC3
|
|
#define DETECT_THRES_OTHER 0x0A
|
|
|
|
#define DEFAULT_SF 7
|
|
#define DEFAULT_PREAMBLE 8
|
|
#define DEFAULT_CR 5
|
|
|
|
#define DIO0_MODE_RXDONE 0x00
|
|
#define DIO0_MODE_TXDONE 0x40
|
|
#define DIO0_MODE_CADDET 0x80
|
|
|
|
#define EV_DIO0 (1 << 0)
|
|
|
|
enum freq {
|
|
F433, F866, F915
|
|
} lora32_freq;
|
|
|
|
typedef enum {
|
|
B78, B104, B156, B208, B3125, B417, B625, B125, B250, B500
|
|
} bandwidth;
|
|
|
|
const long long frequencies[3];
|
|
const long bandwidths[10];
|
|
|
|
typedef void (*receiveCallback)(uint8_t size);
|
|
typedef void (*txdoneCallback)();
|
|
typedef void (*cadDoneCallback)(bool detected);
|
|
typedef void (*cadDetectedCallback)();
|
|
|
|
typedef struct {
|
|
EventGroupHandle_t events;
|
|
} lora32_handle_t;
|
|
|
|
typedef struct lora32_cfg_t {
|
|
uint8_t nss;
|
|
uint8_t dio0;
|
|
uint8_t reset;
|
|
uint8_t fifoIdx;
|
|
|
|
long frequency;
|
|
uint8_t bandwidth;
|
|
|
|
uint8_t spreadingFactor;
|
|
uint8_t codingRate;
|
|
uint16_t preamble;
|
|
|
|
bool useCRC;
|
|
bool implicitHeader;
|
|
|
|
receiveCallback receive;
|
|
txdoneCallback tx_done;
|
|
cadDoneCallback cad_done;
|
|
cadDetectedCallback cad_detected;
|
|
|
|
spi_device_handle_t spi;
|
|
|
|
lora32_handle_t handle;
|
|
} lora32_cfg_t;
|
|
|
|
lora32_cfg_t lora32_create();
|
|
uint8_t lora32_init(lora32_cfg_t *config);
|
|
uint8_t lora32_data_available(lora32_cfg_t *lora);
|
|
|
|
double lora32_calc_datarate(lora32_cfg_t *lora);
|
|
void lora32_dump_regs(lora32_cfg_t *lora);
|
|
void lora32_enable_continuous_rx(lora32_cfg_t *lora);
|
|
void lora32_enable_cad(lora32_cfg_t *lora);
|
|
void lora32_send(lora32_cfg_t *config, uint8_t *data, uint8_t len);
|
|
void lora32_set_bandwidth(lora32_cfg_t *lora, uint8_t bw);
|
|
void lora32_set_coding_rate(lora32_cfg_t *lora, uint8_t cr);
|
|
void lora32_set_spreadfactor(lora32_cfg_t *lora, uint8_t factor);
|
|
void lora32_read_data(lora32_cfg_t *lora, uint8_t *data);
|
|
|
|
#endif // _LORA32_H__
|