33 lines
825 B
Markdown
33 lines
825 B
Markdown
# pos2charmhigh
|
|
|
|
Converts KiCAD .pos placement file to Charmhigh Pick and Place CSV
|
|
|
|
## Usage
|
|
```
|
|
pos2csv -i test/top.pos -f test/feeds.csv -o pnp.csv
|
|
```
|
|
|
|
### CLI
|
|
```
|
|
-i,
|
|
--input KiCAD .pos file
|
|
|
|
-o,
|
|
--output CSV file for the PnP
|
|
|
|
-f,
|
|
--feed Feed file from PnP
|
|
```
|
|
|
|
## Layout
|
|
Board Origin must be below and to the left of your circuit.
|
|
The Charmhigh cannot use negative numbers from the Origin.
|
|
Place a Fiducial footprint to mark the location on the F-Cu layer.
|
|
Use this mark to visually align the origin.
|
|
|
|
## Feed file
|
|
The feed file is generated by the Pick and Place. Go through the normal
|
|
setup process on the machine, saving the file to the SD card. Fetch the
|
|
project file from the card. This will maintain the rest of the file as is
|
|
while updating the section pertaining to placements.
|